Guardian Series 6000 liners are form-fitted
to your outer package. The liner retains the cube shape
while the outer package serves as protection from abrasion
and puncture. There are four side panels with a top and
bottom, forming a cube free of folds and traps that hinder
filling and discharge. You get more material in the package
and complete discharge without residual loss. The form-fit
construction also allows material to completely fill into
the corners of the outer package which creates a fuller
and more stable package. The result is reduced shifting
during transport and increased stability. You get more product
in a smaller space significantly reducing your transportation
and storage costs.
Guardian Series 6000 liners are engineered
to withstand aggressive topple, drop and vibration testing
to prevent failure in extreme conditions. The films used
in construction of this liner have undergone vigorous testing
in development of the product. The resulting liner has excellent
puncture resistance, high tensile strength, and very good
moisture & vapor barrier qualities. It can retain its
form even under heavy loads over extended periods of time.
The liner pattern and placement of thermal impulse heat
seals are key to Guardian's formed liner integrity. Stress
points are reduced by seal location and form. Construction
patterns have been tested and reduce the risk of film and
seal failure.
Form-fit construction gives you high performance
results in a shipping and storage container and can actually
reduce your overall shipping and storage costs.
Fill Spout
Precisely attaches to your filling equipment to direct material
flow into the liner. Controls dust and reduces labor by
eliminating gathering of excess material. Ties off securely,
quickly and easily. Available in diameters; 6", 10",
12", 14", 16", 18", 20", 22"
and 24". Standard material is 3mil, LLDPE.
Top Cap
Encloses the top of the liner body to protect contents.
Optional attachment points are available for securing the
liner to the outer package. Can be made from reinforced
material for added protection from abrasion. Standard material
is 3mil, LLDPE.
Baffle
The backbone of the Series 6000 liner. This octagon shaped
tube is attached to the liner body to prevent the outward
push of material. The panels span across the four flat surfaces
of the body acting as a girdle and keeping them in a generally
square footprint. Unique co-extruded material is engineered
with a high tensile strength without elongation to prevent
package rounding over time. Each baffle span is vented to
aid in material flow during filling and discharge. Standard
material is 8mil, Coextruded HDPE.
Outer Corners
The outer body of the liner protects the contents from contamination
by foreign materials such as moisture and debris. It also
prevents leakage.The corners work in conjunction with the
baffle as a unit to retain it's space saving square shape.
The top cap and the bottom cap fully enclose the contents.
Footprints available are 37", 40" and 42"
square, plus a 37" x 43" rectangle. Standard material
is 6mil, Coextruded HD/LDPE.
Bottom Cap
Encloses the bottom of the liner body to protect contents.
Optional attachment points are available for securing the
liner to the outer package. Can be made from reinforced
material for added protection from abrasion. Standard material
is 3mil, LLDPE.
Discharge Spout
Precisely attaches to your discharging equipment to direct
material flow from the liner. Controls dust and reduces
labor by eliminating gathering of excess material. Ties
off securely, quickly and easily. Available in diameters;
6", 10", 12", 14", 16", 18",
20", 22" and 24". Standard material is 3mil,
LLDPE.
