About Us Bikes For Sale Vintage Parts Sidecars Extras
Special
 
Click on the photos to enlarge.
We will start with the teardown and assessment, go thru the power train rebuild, wheel replacing, electrical, paint, plating, assembly and so on. This is not meant to be a "how to" article as it would require way too many details for that. Instead we hope you get some idea of what goes into the restoration process and we hope some of you will be encouraged to undertake a restoration yourself. Enjoy our work and send us your comments

Meet Jon Pieratt, Jon is one of four BMW techs at Blue Moon Cycle, Jon has been working on motorcycles professionally for about 6 years. he is a graduate of Motorcycle Mechanics Institute, with experience on Harleys, Ducati and BMW. Jon will be doing all the work on this restoration with the exception of paint and plating. This is Jon's first time performing at a frame up restoration. We wish him luck.

This R27 came to us as you see it here, the bike was neglected and parked since 1999. The first thing we did was to get it running so we could access the mechanical condition of the drive train, the speedo shows only 11000 miles and although the bike looks like 111000 miles, close inspection of the wear and tear items such as kick lever, foot peg rubbers and throttle grip indicate that this is a low mileage bike. When we open the engine we will know more.

After a thorough cleaning of the fuel tank and carburetor and a new battery, the bike started and ran great, the engine is smooth and quiet so we expect this to be a great candidate for full restoration.


We like the Aluminum rims because they are easy to polish and look great but these are beat, both rims are bent and nicked, we will replace them with new chrome rims and new spokes. The badge on the fork the indicates previous owner was a member of the BMW vintage club. I wonder why he didn't take better care of his bike.

The entire bike has a light coating of surface rust but no serious cancer. Shock handles have not been cut. all the sheet metal is fairly straight with only miner dents and dings. This bike still has its original paint so we know we wont find ant surprises when we strip the paint.

This explains the rust, ocean states such as Florida can have a damaging effect on steel and aluminum, we wouldn't restore a bike that was in better condition so this one will be ideal.

Speedometer indicates 11000 miles and all the parts are original and correct. Just what we need.

The entire bike is wired with blue wire, we will install one of our new wire harness and find a better fitting battery.

Click here for Episode Two.
.

  Contact Us